Pegasus WRAS M Profile Press Fitting 22mm x 15mm x 15mm Tee

Description

The Pegasus WRAS Approved M Profile Press Fitting 22mm x 15mm x 15mm Tee is a high-quality plumbing fitting designed for water distribution systems. Constructed from durable materials and certified by WRAS, this tee fitting is reliable and long-lasting.

Technical attributes:
– Size: 22mm x 15mm x 15mm
– Material: Copper
– Pressure rating: Up to 16 bar
– WRAS approved

Installation instructions:
1. Cut the pipe to the required length using a pipe cutter.
2. Ensure that the pipe end is clean and free from any debris or burrs.
3. Mark the insertion depth on the pipe using a marker.
4. Insert the pipe into the fitting until it reaches the marked insertion depth.
5. Use a press tool to crimp the fitting and secure the connection.
6. Check for any leaks by conducting a pressure test.

Always refer to manufacturers installation instructions
– Use a deburring tool to remove any sharp edges on the pipe before inserting it into the fitting.
– Make sure that the press tool is properly calibrated to avoid damaging the fitting.
– Do not over-tighten the press tool as it may cause the fitting to deform.
– Double-check all connections before pressurizing the system to avoid leaks.