Pegler Xpress Copper 28mmx1 S7 Female Adaptor

Description

The Pegler Xpress Copper 28mmx1 S7 Female Adaptor is a high-quality plumbing accessory designed for use in copper pipe systems. This female adaptor allows for easy connection of other fittings or pipes to a 28mm copper pipe.

Technical attributes:
– Material: Copper
– Pressure rating: Suitable for use with systems up to 7 bar
– Size: 28mm x 1 inch
– Female adaptor type: S7

Installation instructions:
1. Ensure the copper pipe is cut cleanly and without burrs.
2. Slide the female adaptor onto the pipe, making sure it sits flush against the pipe end.
3. Using a suitable tool, gently tighten the adaptor onto the pipe, ensuring a secure connection.
4. Connect other fittings or pipes to the adaptor as required.

Always refer to manufacturers installation instructions
– Use a pipe cutter to ensure a clean and precise cut on the copper pipe.
– Use a suitable pipe deburring tool to remove any sharp edges or burrs from the cut end of the pipe before installation.
– Apply a small amount of lubricant or sealant to the threads of the adaptor before installation to ensure a watertight connection.
– Do not over-tighten the adaptor, as this can damage the pipe or fitting. Tighten just enough to create a secure connection.