Pegler Xpress Copper GAS 28mmx22mm SG6 Reducer

Description

The Pegler Xpress Copper GAS 28mmx22mm SG6 Reducer is a high-quality plumbing fitting designed for reducing the size of gas pipes in domestic and commercial applications. Made by Pegler, a trusted name in the plumbing industry, this reducer is constructed from durable copper to ensure long-lasting performance and reliability.

Technical Attributes:
– Material: Copper
– Pressure rating: Suitable for gas applications
– Size: 28mm to 22mm reducer
– Certifications: Conforms to industry standards for gas fittings

Installation Instructions:
1. Before installing the reducer, make sure to shut off the gas supply to the area where the fitting will be placed.
2. Clean and deburr the ends of the pipes that will be connected to the reducer to ensure a proper seal.
3. Apply a suitable pipe jointing compound or sealing tape to the threaded ends of the pipes before attaching the reducer.
4. Tighten the connections securely using a suitable wrench to prevent leaks.
5. Once the reducer is securely in place, turn on the gas supply and check for any leaks using a leak detection solution. If any leaks are detected, tighten the connections further until the leaks stop.

By following these PlumbingWholesale.co.uk Installation Advice and using the Pegler Xpress Copper GAS 28mmx22mm SG6 Reducer according to the manufacturer’s guidelines, you can ensure a safe and reliable gas plumbing system in your building.