WRAS M Profile Press Fitting 35mm Slip Coupler

Description

The WRAS Approved M Profile Press Fitting 35mm Slip Coupler is designed for use in plumbing systems to connect two pipes together securely and efficiently. This product is essential for achieving leak-proof joints in pressurized water supply systems.

Technical Attributes:
– Material: Copper
– Pressure Rating: 16 bar
– Size: 35mm
– WRAS Approved (Water Regulations Advisory Scheme)

Installation Instructions:
1. Cut the two pipes to be joined to the required length and prepare the ends by cleaning and deburring.
2. Slide the slip coupler onto one of the pipes. Ensure that the sealing ring is in place inside the fitting.
3. Insert the second pipe into the other end of the slip coupler until it reaches the stop.
4. Use a press fitting tool to press the joint together. Apply even pressure to ensure a secure and watertight connection.
5. Check the joint for any leaks by pressurizing the system and inspecting for any signs of water escaping.
6. Once the joint is proven leak-free, the installation is complete and the pipes can be put into service.

Always refer to manufacturers installation instructions
– Make sure to use the correct sized slip coupler for the pipes being joined.
– Clean the pipes and fittings thoroughly before installation to ensure a proper seal.
– Use a reliable press fitting tool to ensure a secure joint.
– Always check for leaks before covering or concealing the joint.