Filling Loop Straight Part L Compliant

Description

The Filling Loop – Straight – Part L Compliant is an essential component for maintaining the correct pressure levels in a heating system. This straight filling loop is designed to meet Part L regulations for energy efficiency and compliance.

Technical Attributes:
– Material: Copper
– Maximum Pressure: 10 bar
– Inlet Size: 15mm
– Outlet Size: 12mm
– Part L compliant

Installation Instructions/Tips:
1. Turn off the boiler and water supply before installing the filling loop.
2. Connect the filling loop to the heating system using compression fittings.
3. Open the valves on the filling loop to allow water to flow into the system.
4. Monitor the pressure gauge and adjust the pressure as needed.
5. Once the correct pressure is reached, close the valves on the filling loop and securely tighten any connections.
6. Turn on the boiler and check for any leaks before using the heating system.