Description
The Pegasus WRAS Approved M Profile Press Fitting Tee is a high-quality plumbing component designed for use in water distribution systems. This fitting is specifically designed for use with 28mm x 22mm x 22mm pipes, making it suitable for a wide range of applications.
Technical Attributes:
– Material: Copper
– WRAS Approved
– Pressure Rating: Up to 16 bar
– Temperature Range: -20°C to 110°C
– Size: 28mm x 22mm x 22mm
Installation Instructions:
1. Cut the pipe to the desired length using a pipe cutter.
2. Ensure the pipe ends are clean and free of debris.
3. Mark the insertion depth on the pipe using the fitting as a guide.
4. Press the fitting onto the pipe firmly until it reaches the insertion depth mark.
5. Ensure the fitting is securely in place and test the connection for leaks.
Always refer to manufacturers installation instructions
– Use a deburring tool to remove any sharp edges from the cut pipe.
– Make sure the pipe is fully seated in the fitting to prevent leaks.
– Use a press tool specifically designed for press fittings to ensure a secure connection.
Reviews
There are no reviews yet.