TracPipe Brass AutoFlare Elbow Fitting DN22 to 22mm

Description

The TracPipe Brass AutoFlare Elbow Fitting is a high-quality, durable fitting specifically designed for use with TracPipe flexible gas piping systems. This particular fitting is designed to connect DN22 TracPipe tubing to standard 22mm gas piping systems.

Technical Attributes:
– Material: Brass
– Pressure Rating: Up to 500 psi
– Size: DN22 to 22mm

Installation Instructions:
1. Ensure that the gas supply is turned off before beginning installation.
2. Cut the TracPipe tubing to the desired length, making sure to leave enough room for the elbow fitting to be installed.
3. Insert the tubing into the brass AutoFlare elbow fitting, making sure that it is fully seated.
4. Use a flare tool to create a tight seal between the tubing and the fitting.
5. Tighten the compression nut on the fitting to secure it in place.
6. Test the connection for leaks by turning the gas supply back on and performing a pressure test.

Always refer to manufacturers installation instructions
– Use a tubing cutter specifically designed for flexible gas piping to ensure a clean, square cut.
– Make sure to use the appropriate tools, such as a flare tool and wrench, to properly secure the fitting in place.
– Always test the connection for leaks before using the gas system to ensure safety and compliance with regulations.

Overall, the TracPipe Brass AutoFlare Elbow Fitting is a reliable and easy-to-install option for connecting TracPipe tubing to standard 22mm gas piping systems. With its durable brass construction and high-pressure rating, it is sure to provide a long-lasting and secure connection for your gas system.