50 Pack 21.5mm Solvent Weld Overflow Obtuse 45 Elbow

Description

Product: 21.5mm Solvent Weld Overflow Obtuse 45 Elbow

Technical attributes:
– Material: PVC
– Size: 21.5mm
– Angle: 45 Degrees
– Pressure rating: Suitable for both low and high-pressure systems
– Easy solvent weld installation

Always refer to manufacturers installation instructions
1. Cut the pipe to the desired length using a pipe cutter or saw.
2. Ensure that the cut ends of the pipe are clean and free of debris.
3. Apply PVC primer to both the pipe end and the fitting.
4. Apply PVC solvent cement to both the pipe end and the fitting.
5. Insert the pipe into the fitting and hold in place for a few seconds to allow the cement to set.
6. Wipe away any excess cement with a cloth.
7. Ensure the joint is properly aligned and supported during the curing process.

This 21.5mm Solvent Weld Overflow Obtuse 45 Elbow is a durable and reliable fitting for connecting overflow pipes at a 45-Degree angle. Made from high-quality PVC, it is suitable for use in both low and high-pressure systems. The solvent weld installation process is quick and easy, providing a secure and leak-free connection. Perfect for DIY enthusiasts and professional plumbers alike, this elbow is a vital component for any plumbing project.