40mm Waste Solvent Weld Conversion Bend 90 (Colour White)

Description

The 40mm Waste Solvent Weld Conversion Bend 90 in white is a versatile plumbing accessory perfect for transitioning between different pipe sizes or angles. Made from high-quality PVC material, this conversion bend is durable and resistant to corrosion for long-lasting performance.

Technical Attributes:
– Size: 40mm
– Angle: 90 Degrees
– Material: PVC
– Color: White
– Pressure Rating: Suitable for standard household plumbing systems
– Solvent weld installation for a secure and leak-proof connection
– Compatible with other 40mm waste pipe fittings

Installation Instructions:
1. Ensure the pipes are cut cleanly and square before installation.
2. Apply a generous amount of PVC solvent cement to both the pipe and fitting.
3. Insert the pipe into the fitting and twist slightly to ensure a proper bond.
4. Hold the joint in place for a few seconds to allow the solvent cement to set.
5. Wipe away any excess cement and allow the joint to cure according to the manufacturer’s instructions before testing for leaks.

Always refer to manufacturers installation instructions
– Make sure to measure and cut the pipes accurately to ensure a proper fit.
– Clean the pipe and fitting surfaces thoroughly before applying solvent cement to ensure a strong bond.
– Allow the solvent cement to fully cure before testing the joint for leaks.
– Follow all safety precautions when working with PVC solvent cement to avoid skin contact or inhalation.