Waste 40mm Pushfit 90 Degree Conversion Bend (Colour Black)

Description

The Waste 40mm Pushfit 90 Degree Conversion Bend Black is a durable and reliable plumbing fitting designed for waste water systems. This conversion bend helps redirect waste water flow at a 90 Degree angle, making it ideal for tight spaces or when you need to navigate around obstacles.

Technical Attributes:
– Size: 40mm
– Material: Plastic
– Pressure: Suitable for low pressure waste water systems
– Colour: Black

Installation Instructions:
1. Cut the existing waste pipe at the desired location for the 90 Degree bend.
2. Slide the conversion bend onto the cut end of the waste pipe.
3. Ensure a secure fit by gently pushing and twisting the fitting until it is fully inserted.
4. Connect the other end of the conversion bend to the existing waste pipe using Push-Fit connections.
5. Secure all connections with appropriate fittings or solvent cement as needed.
6. Test the system for leaks by running water through the pipes.

Always refer to manufacturers installation instructions
– Make sure to measure and cut the waste pipes accurately to ensure a proper fit.
– It is recommended to use a pipe cutter for clean and precise cuts.
– Do not over-tighten Push-Fit connections to avoid damaging the pipes.
– Always double-check all connections before running water through the system to prevent leaks.