Elysee 40mm x 20mm Overflow Reducer Solvent Weld (Colour Black)

Description

The MASTERFLOW 40mm x 20mm Overflow Reducer Solvent Weld in Black is a high-quality plumbing accessory designed for reducing the size of your overflow pipes. Here are some technical attributes of this product:

– Material: PVC
– Size: 40mm x 20mm (reduces from 40mm to 20mm)
– Color: Black
– Solvent weld joint for easy and secure installation

Installation Instructions:
1. Clean the ends of the pipes that you will be connecting the overflow reducer to.
2. Apply a generous amount of PVC primer to both the pipe ends and the inside of the overflow reducer.
3. Immediately following the primer, apply PVC cement to the same areas.
4. Insert the overflow reducer into the pipes and hold in place for a few seconds to allow the cement to set.
5. Allow the cement to dry completely before testing the connection with water.

Always refer to manufacturers installation instructions
– Ensure that the pipes are cut cleanly and evenly before attempting to connect the overflow reducer.
– Use a spirit level to ensure that the overflow reducer is installed in a straight and level position.
– Do not disturb the connections while the cement is drying to avoid leaks or weak joints.

The MASTERFLOW 40mm x 20mm Overflow Reducer Solvent Weld in Black is a durable and reliable solution for reducing the size of your overflow pipes. With proper installation and maintenance, this product will provide you with years of leak-free performance.