WRAS M Profile Press Fitting 54mm x 42mm Fitting Reducer GAS

Description

The WRAS Approved M Profile Press Fitting 54mm x 42mm Fitting Reducer GAS is a high-quality plumbing fitting designed for reducing the size of gas pipes in a safe and efficient manner. This fitting is WRAS approved, ensuring it meets the highest standards for water regulations.

Technical Attributes:
– Size: 54mm x 42mm
– Material: Copper
– Max Pressure: 5 bar
– Operating Temperature: -20°C to 120°C
– WRAS Approved
– Suitable for gas installations

Installation Instructions:
1. Cut the gas pipe to the desired length using a pipe cutter.
2. Ensure the ends of the pipe are clean and free from debris.
3. Slide the fitting onto the pipe and ensure it is pushed on securely.
4. Use a press tool to crimp the fitting onto the pipe, ensuring a tight seal.
5. Check for any leaks by performing a pressure test before using the gas system.

Always refer to manufacturers installation instructions
– Use a deburring tool to remove any burrs or rough edges from the cut pipe before installing the fitting.
– Make sure all fittings and pipes are clean and dry before assembly to prevent leaks.
– Double-check the size and type of fitting before installation to ensure compatibility with your gas system.
– Use the appropriate press tool and follow the manufacturer’s guidelines for proper crimping techniques.