Copper Solder Ring Fitting Reduced End Tee 28mm x 15mm x 28mm

Description

The Copper Solder Ring Fitting – Reduced End Tee is a durable and reliable plumbing component used for connecting copper pipes in a tee configuration.

Technical attributes include:
– Material: Copper
– Size: 28mm x 15mm x 28mm
– Pressure rating: Up to 16 bar

Installation Instructions:
1. Ensure the copper pipes are clean and free of any debris.
2. Use a pipe cutter to cut the pipes to the desired lengths.
3. Slide the solder ring fitting onto the pipe, ensuring it is positioned correctly for the tee connection.
4. Apply flux to the pipe and fitting to ensure a secure solder joint.
5. Use a blow torch to heat the joint evenly, allowing the solder to flow and create a tight seal.
6. Allow the joint to cool and check for any leaks before completing the installation.

Always refer to manufacturers installation instructions
– Make sure to measure and cut the pipes accurately to ensure a proper fit.
– Use a pipe cleaning tool to remove any burrs or rough edges before installing the fitting.
– Practice proper soldering techniques to avoid any leaks or weak joints.
– Always wear appropriate safety gear, such as gloves and goggles, when working with soldering equipment.