McAlpine 42mm (Coating Chrome) Plated Compression Coupler

Description

The McAlpine 42mm Chrome Plated Compression Coupler is a high-quality plumbing fitting designed for connecting 42mm pipes in a water supply system.

Technical Attributes:
– Material: Chrome plated Copper construction for durability and corrosion resistance
– Pressure: Suitable for use in both low and high-pressure systems
– Size: 42mm diameter for a secure and leak-proof connection

Installation Instructions:
1. Cut the pipe to the desired length using a pipe cutter.
2. Ensure the pipe ends are clean and free of any debris or burrs.
3. Slide the compression nut and olive onto the pipe.
4. Insert the pipe into the coupler and ensure it is fully seated.
5. Tighten the compression nut with a wrench to create a secure seal.
6. Test the connection for leaks by turning on the water supply.

Always refer to manufacturers installation instructions
– Use a pipe deburring tool to remove any sharp edges or burrs on the pipe ends.
– Apply a thin layer of lubricant to the olive to ensure a smooth and secure fit.
– Avoid over-tightening the compression nut as this can lead to damage or leaks.
– Double-check the alignment of the pipe before tightening the compression nut to prevent any misalignments.