McAlpine Grid Top Shower Trap (Colour White) STW2-95

Description

The McAlpine Grid Top Shower Trap White STW2-95 is a durable and efficient solution for keeping your shower drain free from clogs.

Technical attributes:
– Material: High-Quality Plastic
– Pressure: Suitable for low to high water pressure systems
– Diameter: 90mm
– Height: 25mm
– Grid Diameter: 70mm
– Flow Rate: 48 Litres per minute

Installation Instructions:
1. Remove the existing shower trap by unscrewing the retaining nut and sliding the trap out of the waste pipe.
2. Insert the McAlpine Grid Top Shower Trap into the waste pipe and secure it in place by tightening the retaining nut.
3. Ensure that the trap is positioned correctly and that the grid is facing upwards.
4. Test the trap by pouring a small amount of water down the drain to check for any leaks.
5. Once the trap is installed securely and functioning properly, replace the shower cover to complete the installation.

Always refer to manufacturers installation instructions
– Make sure to properly clean the waste pipe before installing the new trap to ensure proper drainage.
– Use plumber’s tape or sealant to create a watertight seal between the trap and the waste pipe.
– Regularly clean and maintain the trap to prevent clogs and blockages.