McAlpine VP100N Ventapipe Air Admittance Valve Solvent Weld

Description

The McAlpine VP100N Ventapipe Air Admittance Valve Solvent Weld is a high-quality solution for ensuring proper ventilation and preventing foul odors from escaping through soil pipes. This product is designed for use in plumbing systems where air admittance valves are required for proper operation.

Technical Attributes:
– Material: Polypropylene
– Maximum operating pressure: 5m head of water (0.5 bar)
– Conforms to BS EN 12380: 2002

Installation Instructions:
1. Before installation, ensure that all pipes and fittings are clean and free from any debris.
2. Apply a generous amount of solvent cement to both the end of the pipe and the inside of the valve socket.
3. Insert the pipe into the valve socket and twist slightly to ensure a secure fit.
4. Hold the pipe and valve in place for a few seconds to allow the cement to set.
5. Once the valve is securely in place, do not disturb or apply any pressure to it until the cement has fully cured.

Always refer to manufacturers installation instructions
– Make sure to cut the pipe to the correct length before attaching the valve to ensure a proper fit.
– Allow the solvent cement to fully cure before testing the valve to ensure a secure seal.
– It is recommended to check the valve periodically for any signs of wear or damage and replace as needed.

Overall, the McAlpine VP100N Ventapipe Air Admittance Valve Solvent Weld is a reliable and efficient solution for ensuring proper ventilation in plumbing systems. With its durable construction and easy installation process, this valve is a great addition to any plumbing project.