Pegasus WRAS M Profile Press Fitting 42mm Coupler

Description

The Pegasus WRAS Approved M Profile Press Fitting 42mm Coupler is a high-quality plumbing component designed for use in water supply systems. This coupler is specifically designed for joining two pipes with a diameter of 42mm.

Technical Attributes:
– Material: Made from high-quality Copper material for durability and longevity
– Pressure rating: Suitable for use in systems with a maximum pressure of 16 bar
– WRAS approved: Certified by the Water Regulations Advisory Scheme for quality and compliance with water supply regulations
– Profile: Features the innovative M profile design for secure and leak-proof connections

Installation Instructions:
1. Prepare the pipes to be connected by cutting them to the desired length and ensuring that the ends are clean and free from debris.
2. Insert one end of each pipe into the coupler until they reach the stop point.
3. Use a press tool to press the fitting onto the pipes. Make sure to apply firm pressure to ensure a secure connection.
4. Check for any leaks or drips after installation to ensure that the connection is watertight.

Always refer to manufacturers installation instructions
– Make sure to measure and cut the pipes accurately to ensure a proper fit within the coupler.
– Use a deburring tool to remove any sharp edges or burrs from the cut ends of the pipes to prevent damage to the coupler.
– Ensure that the pipes are fully inserted into the coupler before using a press tool to secure the connection.