Pegler Xpress Copper 22mmx22mmx.75 S30 Female Centre Tee

Description

The Pegler Xpress Copper 22mmx22mmx.75 S30 Female Centre Tee is a high-quality plumbing fitting designed for easy and reliable installation in heating and potable water systems. Made from durable copper material, this tee is suitable for both commercial and residential applications.

Technical attributes:
– Size: 22mm x 22mm x 0.75
– Pressure rating: S30 (up to 30 bar)
– Female centre tee design for easy connection
– Compatible with copper pipes

Installation instructions:
1. Ensure the pipe ends are clean and free of debris before installing the tee.
2. Use a pipe cutter to make a clean, straight cut on the copper pipe where the tee will be installed.
3. Apply flux to the pipe ends and the inside of the tee fittings.
4. Insert the tee onto the pipe and align it properly.
5. Heat the joint with a torch until the solder melts and flows around the joint. Make sure the solder flows all the way around the joint for a secure connection.
6. Allow the joint to cool and then wipe away any excess solder with a clean rag.

Always refer to manufacturers installation instructions
– Use a pipe reamer to remove any burrs from the inside of the copper pipe before installing the tee.
– Make sure the pipe and fittings are properly aligned before soldering to prevent leaks.
– Use a thermometer to monitor the temperature of the joint during soldering to ensure a proper seal.

Overall, the Pegler Xpress Copper 22mmx22mmx.75 S30 Female Centre Tee is a reliable and durable plumbing fitting that is easy to install and will provide long-lasting performance in your plumbing system.