Pegler Xpress Copper 28mmx28mmx.75 S30 Female Centre Tee

Description

The Pegler Xpress Copper 28mmx28mmx.75 S30 Female Centre Tee is a high-quality plumbing fitting designed for use in hot and cold water systems. This female centre tee is made from durable copper material and is designed to withstand high pressure applications.

Technical Attributes:

– Material: Copper
– Size: 28mm x 28mm x .75
– Pressure Rating: S30 (Suitable for high pressure applications)
– Female Centre Tee design

Installation Instructions:
1. Ensure that the pipe surfaces are clean and free of any debris before beginning installation.
2. Use a pipe cutter to cut the copper pipe to the desired length, ensuring that the cuts are clean and straight.
3. Slide the female centre tee onto the pipe, ensuring a snug and secure fit.
4. Use a suitable pipe fitting tool to solder the joints, ensuring a watertight seal.
5. Allow the soldered joints to cool and set before testing the system for leaks.
6. Once the installation is complete, check for any leaks and make any necessary adjustments to ensure a secure fit.

Always refer to manufacturers installation instructions
– Use a deburring tool to remove any sharp edges or burrs from the cut pipe ends before fitting the female centre tee.
– Apply a thin layer of flux to the pipe ends before soldering to ensure a proper bond.
– Use a heat-resistant mat or surface to protect surrounding areas from heat during the soldering process.
– Test the system for leaks before covering or concealing any pipes to ensure a secure installation.