Pegler Xpress Copper GAS 42mmx28mm SG6 Reducer

Description

The Pegler Xpress Copper GAS 42mmx28mm SG6 Reducer is a high-quality plumbing fitting designed for use in gas systems. Made from durable copper, it provides a reliable connection that is resistant to corrosion and leaks.

Technical Attributes:
– Material: Copper
– Pressure rating: SG6 (6 bar)
– Dimensions: 42mm x 28mm
– Reducer size: 42mm to 28mm

Installation instructions:
1. Ensure that the gas supply is shut off before beginning installation.
2. Use a pipe cutter to cut the pipes to the appropriate length for the reducer to be inserted.
3. Clean the cut ends of the pipes with a pipe cleaning tool to remove any debris.
4. Apply a small amount of flux to the outside of the pipes and the inside of the reducer.
5. Insert the reducer onto the pipes and ensure that it is pushed all the way in.
6. Heat the joint with a soldering torch and apply solder around the joint to create a secure seal.
7. Allow the joint to cool before turning the gas supply back on and checking for leaks.

Always refer to manufacturers installation instructions
– Make sure to use the appropriate size reducer for your pipes to ensure a secure fit.
– Properly clean and flux the pipes before soldering to create a strong connection.
– Check for leaks after installation by applying soapy water to the joint and looking for bubbles. If any leaks are found, re-solder the joint to create a better seal.