Description
The Pegler Xpress Copper GAS 76mmx54mm SG6 Reducer is a high-quality plumbing accessory designed to reduce the size of gas pipes in a safe and reliable manner. Made from durable copper material, this reducer is built to withstand high pressure and temperature conditions, making it suitable for a variety of gas applications.
Technical attributes:
– Material: Copper
– Size: 76mm x 54mm
– Pressure rating: SG6 (suitable for gas applications)
– Reducer type: Concentric
Installation instructions:
1. Before installing the reducer, ensure that the gas supply is turned off and the pipes are properly cleaned and deburred.
2. Apply a generous amount of flux to the inside of the reducer and the outside of the pipe end that will be inserted.
3. Insert the pipe end into the reducer and make sure it is securely in place.
4. Heat the joint with a torch until the solder melts and flows into the joint, creating a secure bond.
5. Allow the joint to cool and inspect for any leaks before turning the gas supply back on.
Always refer to manufacturers installation instructions
– Use a propane torch or MAPP gas torch for a faster and more efficient soldering process.
– Make sure to wear appropriate safety gear, such as gloves and eye protection, when working with hot materials.
– Test the joint for leaks by spraying a mixture of soapy water on it and looking for bubbles. If any bubbles appear, turn off the gas supply immediately and re-solder the joint.
Reviews
There are no reviews yet.