Plastic Compression 40mm 45 Degree Obtuse Bend (Colour White)

Description

The Plastic Compression 40mm 45 Degree Obtuse Bend White is a versatile plumbing fitting that is perfect for connecting two pieces of pipe at a 45-Degree angle. Made from durable plastic, this bend is designed to withstand high pressure and provide a secure connection for your plumbing system.

Technical Attributes:
– Material: Plastic
– Size: 40mm
– Angle: 45 Degree Obtuse
– Color: White
– Pressure rating: Suitable for high-pressure applications

Installation Instructions:
1. Measure and mark the location where the bend will be installed.
2. Cut the pipes to the desired length and deburr the edges to ensure a clean connection.
3. Insert one end of the pipe into one side of the bend and the other end into the opposite side.
4. Use a compression fitting tool to secure the connection by tightening the compression ring around the pipe.
5. Check for leaks and make any necessary adjustments to ensure a tight seal.

Always refer to manufacturers installation instructions
– Make sure to properly align the pipes before inserting them into the bend to prevent any misalignment.
– Use a lubricant on the pipes to help them slide into the compression fitting more easily.
– Avoid over-tightening the compression ring as it can damage the fitting and cause leaks.