WRAS M Profile Press Fitting 22mm x 15mm Reduced Coupler GAS

Description

The WRAS Approved M Profile Press Fitting 22mm x 15mm Reduced Coupler GAS is a high-quality plumbing accessory designed for connecting gas pipes with a diameter of 22mm to pipes with a diameter of 15mm.

Technical Attributes:
– Material: Copper
– Pressure Rating: Suitable for use with gas applications
– WRAS Approved: Certified to meet UK Water Regulations Advisory Scheme standards

Installation Instructions:
1. Ensure that the gas supply is turned off before starting the installation process.
2. Clean the ends of the pipes that will be connected with a pipe cleaning brush to remove any dirt or debris.
3. Slide the reduced coupler onto the pipes, ensuring a snug fit.
4. Use a press fitting tool to securely crimp the coupler onto the pipes. Ensure that the crimp is uniform and tight.
5. Test the connection by turning on the gas supply and checking for leaks. If any leaks are found, immediately turn off the gas supply and re-crimp the connection.

Always refer to manufacturers installation instructions
– Ensure that the pipe ends are cut cleanly and squarely to ensure a proper seal.
– Do not overtighten the press fitting tool, as this can damage the coupler and lead to leaks.
– Use a pipe support or bracket to secure the pipes in place once the connection is made to prevent stress on the coupler.

The WRAS Approved M Profile Press Fitting 22mm x 15mm Reduced Coupler GAS is a reliable and durable solution for connecting gas pipes of different diameters, with the added assurance of WRAS certification for compliance with UK regulations.