WRAS M Profile Press Fitting 42mm x 22mm Fitting Reducer

Description

The WRAS Approved M Profile Press Fitting 42mm x 22mm Fitting Reducer is a high-quality plumbing component designed for use in water supply systems. It is specifically designed to reduce the diameter of a pipe from 42mm to 22mm, allowing for seamless connection with other pipes or fittings.

Technical Attributes:
– Material: Copper
– Pressure Rating: Suitable for high pressure applications
– WRAS approved: Ensures compliance with UK water regulations
– Size: 42mm x 22mm

Installation Instructions:
1. Ensure that the pipe ends to be connected are clean and free of any dirt or debris.
2. Slide the fitting reducer onto the pipe with the larger diameter (42mm) until it reaches the desired position.
3. Use a press fitting tool to securely press the fitting onto the pipe, ensuring a tight and leak-free connection.
4. Repeat the process for the other end of the fitting reducer, connecting it to the pipe with the smaller diameter (22mm).
5. Test the connection for leaks by running water through the system before enclosing it in walls or covering it with insulation.

Always refer to manufacturers installation instructions
– It is recommended to use a calibrated press fitting tool to ensure proper installation and to prevent damage to the fitting or pipes.
– Make sure to align the pipes and fittings properly before pressing to avoid misalignment or leaks.
– Apply a small amount of lubricant to the pipe ends before inserting them into the fitting to ease the installation process.
– Always follow manufacturer’s instructions and guidelines for proper installation and maintenance of press fittings.