Description
The 50mm Solvent MuPVC Pipe – 90 Degree Solvent Weld Conversion Bend is a high-quality, durable plumbing accessory designed for efficiently redirecting the flow of water in a piping system.
Technical Attributes:
– Material: MuPVC (modified unplasticized polyvinyl chloride)
– Size: 50mm diameter
– Angle: 90 Degree bend
– Solvent weld connection for secure and leak-proof joints
– Pressure rating: suitable for use in systems with high water pressure
Installation Instructions:
1. Ensure the pipe and fitting are clean and free of dirt or debris.
2. Apply a solvent adhesive to both the pipe and fitting.
3. Insert the pipe into the fitting and twist slightly to ensure a proper bond.
4. Hold the joint in place for a few minutes to allow the solvent to set.
5. Allow the adhesive to cure fully before pressurizing the system.
Always refer to manufacturers installation instructions
– Be sure to measure and cut the pipe accurately to ensure a proper fit.
– Use a deburring tool to remove any rough edges or burrs from the cut pipe.
– Check for leaks after installation by pressurizing the system and inspecting all joints.
– Follow manufacturer recommendations for solvent adhesive cure times to ensure a strong bond.
Reviews
There are no reviews yet.