Description
The Copper End Feed Fitting Reducer 76mm X 54mm is a high-quality plumbing component designed for use in various piping systems. This fitting is ideal for reducing the diameter of a copper pipe from 76mm to 54mm, allowing for a seamless and secure connection between pipes of different sizes.
Technical Attributes:
– Material: Copper
– Pressure Rating: Suitable for use in both low and high-pressure applications
– Size: 76mm X 54mm
– End Feed: Provides a secure and leak-proof connection
Installation Instructions:
1. Make sure the pipe ends are clean and free of any debris before applying the fitting.
2. Apply a thin layer of soldering flux to the pipe ends.
3. Insert the pipe ends into the fitting, ensuring a snug fit.
4. Heat the fitting and pipe joint evenly with a torch until the solder melts and forms a secure bond.
5. Allow the joint to cool completely before testing for leaks.
Always refer to manufacturers installation instructions
– Use a pipe cutter to ensure clean and straight cuts on the copper pipes.
– When soldering, make sure to heat the fitting evenly to prevent any gaps in the joint.
– Check for leaks by pressurizing the system with water before covering up the joints with insulation or drywall.
Reviews
There are no reviews yet.