Description
The Pegasus WRAS Approved M Profile Press Fitting 15mm Coupler is a high-quality plumbing accessory designed for use in commercial and residential water systems. This coupler is constructed from durable Copper material, ensuring long-lasting performance and resistance to corrosion.
Technical attributes:
– Size: 15mm
– Material: Copper
– WRAS approved for use in water systems
– Maximum pressure: 16 bar
– Temperature range: -20°C to 110°C
Installation instructions:
1. Ensure that the pipes to be connected are clean and free from debris.
2. Slide the coupler onto one end of the pipe, making sure it is fully seated.
3. Use a press fitting tool to secure the coupler onto the pipe. Follow the manufacturer’s instructions for the proper use of the tool.
4. Repeat the process for the second pipe end, ensuring a secure and leak-free connection.
5. Test the connection for leaks by running water through the system.
Always refer to manufacturers installation instructions
– Make sure to properly measure and cut the pipes to ensure a tight fit with the coupler.
– Use a deburring tool to remove any burrs or rough edges on the pipe ends before installation.
– Avoid overtightening the press fitting tool, as this can damage the coupler or pipes.
– Inspect the installation for leaks before covering or concealing the pipes.
Reviews
There are no reviews yet.