Pegler Xpress Copper 76.1mm S12 Elbow

Description

The Pegler Xpress Copper 76.1mm S12 Elbow is a high-quality plumbing fitting designed for use in potable water and heating systems. This elbow provides a reliable and durable connection between copper pipes, offering easy installation and optimal performance.

Technical attributes:
– Material: Copper
– Size: 76.1mm
– Pressure rating: S12
– Connection type: Elbow

Installation instructions:
1. Ensure that the copper pipes are clean and free from any debris before installation.
2. Apply a thin layer of soldering flux to the pipe ends that will be joined by the elbow.
3. Slide the Pegler Xpress Copper 76.1mm S12 Elbow onto the pipe and position it at the desired angle.
4. Use a blowtorch to heat the joint evenly, allowing the solder to flow and create a secure bond.
5. Allow the joint to cool and inspect for any leaks or defects before pressurizing the system.

Always refer to manufacturers installation instructions
– Use a pipe cutter to ensure clean and straight cuts on the copper pipes, promoting a tight seal with the elbow.
– Apply Teflon tape or joint compound to the male threads of the elbow before screwing it into a fitting to prevent leaks.
– Avoid overheating the copper pipes during soldering to prevent damage to the elbow or the pipe itself.