Solvent Weld 32mm 90 Degree Elbow (Colour Black)

Description

The Solvent Weld 32mm 90 Degree Elbow in Black is an essential plumbing fitting for joining two 32mm pipes at a 90-Degree angle. Made from high-quality PVC material, this elbow provides a strong and leak-proof connection in solvent welded piping systems.

Technical Attributes:
– Material: PVC
– Size: 32mm
– Angle: 90 Degrees
– Color: Black
– Pressure Rating: Suitable for low-pressure applications

Installation Instructions:
1. Ensure that the pipe ends are clean and free from any dirt, grease, or debris.
2. Apply a generous amount of solvent cement to both the pipe end and the inside of the elbow socket.
3. Insert the pipe into the elbow socket and twist slightly to ensure a proper fit.
4. Hold the joint in place for a few seconds to allow the solvent cement to bond.
5. Wipe away any excess cement with a cloth.
6. Allow the joint to cure for the recommended time before pressurizing the system.

Always refer to manufacturers installation instructions
– Make sure to measure and cut the pipes accurately before installing the elbow to ensure a snug fit.
– Use a pipe cleaner or primer before applying solvent cement to improve the bond strength.
– Avoid overtightening the joints, as this can cause damage to the fitting.

The Solvent Weld 32mm 90 Degree Elbow in Black is a durable and reliable solution for creating secure connections in your plumbing system. Upgrade your piping installation with this high-quality elbow today.