Description
The Solvent Weld 40mm 90 Degree Swept Bend White is a versatile plumbing accessory used for creating a smooth, leak-proof joint in a PVC pipe system.
Technical Attributes:
– Material: PVC (polyvinyl chloride)
– Pressure: Suitable for low pressure applications
– Size: 40mm
– Angle: 90 Degrees swept bend
– Color: White
Installation Instructions:
1. Ensure the pipes being joined are clean and free of debris.
2. Apply a thin layer of PVC solvent cement to the outside of one pipe end and the inside of the fitting socket.
3. Quickly insert the pipe into the fitting socket, ensuring a snug fit.
4. Hold the joint together firmly for a few seconds to allow the cement to set.
5. Wait for the recommended curing time before pressurizing the system.
Always refer to manufacturers installation instructions
– Use a proper PVC solvent cement and follow manufacturer’s instructions for best results.
– Make sure the pipes are cut straight and deburred before joining with the fitting.
– Avoid excessive twisting or rocking during the assembly process to prevent leaks.
– Test the joint for leaks before covering or burying it.
Reviews
There are no reviews yet.