TracPipe Brass AutoFlare Equal Tee GAS Pipe Fitting 15mm

Description

The TracPipe Brass AutoFlare Equal Tee GAS Pipe Fitting – 15mm is a high-quality plumbing fitting designed for use in gas pipe systems. The fitting is made of durable brass material, ensuring longevity and resistance to corrosion.

Technical attributes:
– Size: 15mm
– Material: Brass
– Max Working Pressure: 5 bar
– Suitable for use with both natural gas and LPG systems
– AutoFlare technology for secure and leak-proof connections

Installation instructions:
1. Ensure that the gas supply is turned off before beginning installation.
2. Cut the gas pipe to the desired length using a pipe cutter.
3. Remove any sharp edges or burrs from the cut end of the pipe.
4. Slide the AutoFlare fittings onto the cut end of the pipe.
5. Press the fitting firmly onto the pipe until it is fully seated.
6. Use a wrench to tighten the fitting securely in place.
7. Repeat the process for the other end of the pipe if connecting to additional fittings.
8. Once all fittings are in place, turn on the gas supply and check for any leaks using a gas leak detection solution.

Note: It is recommended to consult with a professional plumber for installation if you are unfamiliar with working on gas pipe systems. Always ensure that all connections are secure and leak-proof before turning on the gas supply.